Zodiac FloPro e3 – Variable Speed
The FloPro™ e3 pump is a variable speed pump. It can operate longer at a lower speed, reducing electricity consumption by up to 80 %.
- User interface: 1-line backlit LCD screen (blue display)
- Operating modes: Master/slave connection to filtration timer
- Number of speeds: 3 programmable speeds (+/- 50 RPM) Factory settings: ECO (1400 RPM), CLEAN (2150 RPM) & BOOST (2850 RPM)
- Priming: Automatic at start-up (2 mins at 2850 rpm)
- Safety features: Automatic high or low voltage cut-out
- Compatible pipework: DN50 mm & DN63 mm (2″ threaded pump inlet/outlet, 63/50 mm union connectors provided)
- Usage: Freshwater and saltwater up to 6 g/L (6000 ppm)
Technical specifications:
| Motor type | Permanent magnet synchronous motor (ECM* technology), TEFC**, class F insulation |
| Efficiency | > 80% (as per standard IE3) |
| Power output (P2) | 1.00 HP / 0.75 kW |
| Flow rate at 10 mWC | 16.3 m3/h (at 2,850 rpm) |
| Maximum flow rate | 22.4 m3/h |
| Maximum Manometric Head | 19.1 m |
| Maximum water temperature | 35 °C |
| Speeds | 3 programmable speeds |
| Speed range: | 1,000 – 2,850 rpm (adjustable in intervals of 50 rpm) |
| Factory settings: | ECO (1,400 RPM), CLEAN (2,150 RPM) & BOOST (2,850 RPM) |
| Protection rating | IPX5 |
| 50 Hz power supply | 220-240 VAC |
| User Interface | 1-line LCD screen (blue display) |
| Operating modes | Master/slave connection to filtration timer |
| Self-priming feature | At start-up (2 min. at 2,850 rpm) |
| Safety | Automatic high or low voltage cut-out |
| Compatible pipework | DN50 mm & DN63 mm (2″ threaded pump inlet/outlet, union connectors 63) |
| Pre-filter basket volume | 2.6 L |
Warranty: 3 years
Accessories included in the pack:
- 63/50 mm union connectors
Associated products
- Thin pump stand
- Thick pump stand
- Boreal D640
